BACK
ultrastar-dc-ha210-2tb-angle-western-digital

Ultrastar DC HA200 Series

  • Low Capacity. Entry Level
  • Entry-Level Capacity Delivers Data Center Value
  • Entry-Level Affordability
  • Low Capacity – Optimized for server boot and smaller data sets
  • Legacy Support – Native 512-byte sectors with SATA 6 Gb/s interface
  • Enterprise Class – 2M hour MTBF rating with 5-year limited warranty



Lower Capacity and Cost Effective for Smaller Data Sets and Legacy Applications

Data centers face growing pressures to manage costs. For affordable server boot drives, or applications that use smaller data sets, Western Digital offers the Ultrastar DC HA200 series, an entry-level, low capacity line of enterprise-class hard drives. Designed to handle workloads up to 550TB per year, the Ultrastar DC HA200 series delivers up to 2TB cost-effective storage capacity for data center environments. Rotational Vibration Safeguard (RVS) technology utilizes sophisticated electronics to monitor the drive and correct both linear and rotational vibration disturbances in real time—especially helpful in multi-drive arrays and rack-mounted systems maintaining high read/write performance. Ultrastar DC HA200 series is offered with a SATA 6 Gb/s interface and native 512-byte (512n) sector size for compatibility with legacy data center applications.





ultrastar-dc-ha210-2tb-left-western-digital

Low Capacity

1TB and 2TB models, cost-optimized for server boot and smaller data sets

Legacy Compatibility

SATA 6 Gb/s interface with 512n sector format supports legacy systems

Built for the Enterprise

Robust mechanical design with 2M hours MTBF rating and 5-year limited warranty

Ultrastar DC HA210
General
Interface
SATA 6Gb/s
Capacity1
2TB / 1TB
Format: Sector size (bytes)
512 native (512n)
Performance
Data Buffer (MB)2
128
Rotational Speed (RPM)
7200
Interface Transfer Rate (MB/s, max)
600
Sustained Transfer Rate
(MiB/s, typical)

191 / 175

(MB/s, typical)
200 / 184
Reliability
Error Rate (non-recoverable, bits read)
1 in 1015
MTBF (M hours)
2
Annualized Failure Rate (AFR)4
0.44%
Load/Unload Cycles (at 40ºC)
600,000
Availability (hrs/day x days/wk)
24x7
Limited Warranty
5 years
Acoustics
Idle/Operating (Bels, typical)
2.5/2.8
Power
Requirement
+5 VDC, +12VDC
Operating (W, typical)6
8.1
Idle (W)
5.9
Physical Size
Z-Height (mm)
26.1
Dimensions (width x depth, mm)
101.6 (+/-0.25) x 147
Weight (g, typical)
640 (+/-10%)
Environmental (operating)
Ambient Temperature
5º to 60º C
Shock (half-sine wave, 2ms, G)
65
Vibration (G RMS, 5 to 500 Hz)
1.08 (XYZ)
Environmental (non-operating)
Ambient Temperature
-40º to 70º C
Shock (half-sine wave, 2ms, G)
300
Random vibration (G RMS 2 to 200 Hz)
3.8 (XYZ)

Disclosures

1: One megabyte (MB) is equal to one million bytes, one gigabyte (GB) is equal to 1,000MB (one billion bytes), and one terabyte (TB) is equal to 1,000GB (one trillion bytes) when referring to storage capacity. Accessible capacity will vary from the stated capacity due to formatting, system software, and other factors.
2: Portion of buffer capacity used for drive firmware.
3: 1MiB = 1,048,576 bytes (220), 1MB = 1,000,000 bytes (106).
4: MTBF and AFR targets are based on a sample population and are estimated by statistical measurements and acceleration algorithms under median operating conditions. MTBF and AFR ratings do not predict an individual drive’s reliability and do not constitute a warranty.



Highlights

  • Up to 2TB capacity in a standard 3.5-inch form factor
  • RVS anti-vibration technology for robust performance in multi-drive environments
  • Reliable, field-proven design
  • SATA 6 Gb/s with 512-byte (512n) supports legacy enterprise applications
  • 2M hours MTBF rating and 5-year limited warranty

Applications and Workload

  • RAID Arrays
  • Server Boot Drive
  • Direct-Attached Storage (DAS)
  • Network-Attached Storage (NAS)
  • Legacy mainstream enterprise capacity applications that require 512n block size